{"product_id":"maytronics-ph-drive-i-series-with-probe","title":"Maytronics - pH-Drive i-Series Automatic pH Controller with Probe (BR-OZ-I-Drive-P)","description":"\u003ch1\u003eMaytronics pH-Drive i-Series Automatic pH Controller with Probe\u003c\/h1\u003e\u003ch2\u003e🏷️ Brand\u003c\/h2\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.maytronics.com.au\/\" target=\"_blank\" rel=\"noopener\"\u003eMaytronics\u003c\/a\u003e\u003c\/p\u003e\u003ch2\u003e📝 Description\u003c\/h2\u003e\u003cp\u003eThe Maytronics pH-Drive i-Series is an automatic pH controller for Maytronics Ozone Swim systems that measures pool pH with its probe and doses diluted hydrochloric acid through a built-in peristaltic pump to hold your set point (default pH 7.6).\u003c\/p\u003e\u003cp\u003eIt plugs into the matching IP65 outlet on the Ozone Swim unit for power. Modes include Auto Control, 24 Hr Delay and Standby, and Quick Dose adds 1 to 5 litres when you need a manual top-up. A pH alert stops dosing if pH stays away from the set point for 4 hours or more.\u003c\/p\u003e\u003ch2\u003e📦 Parts Included\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e1x pH-Drive i-Series controller with peristaltic dosing pump\u003c\/li\u003e\n\u003cli\u003e1x pH sensor (probe)\u003c\/li\u003e\n\u003cli\u003e1x pH tee with non-return valve\u003c\/li\u003e\n\u003cli\u003e1x Mounting plate, screws and wall plugs\u003c\/li\u003e\n\u003cli\u003e1x Suction and supply tubing with compression nuts\u003c\/li\u003e\n\u003cli\u003e1x Drum weight and tube\u003c\/li\u003e\n\u003cli\u003e2x 50 x 40 mm reduction bushes\u003c\/li\u003e\n\u003cli\u003e1x pH 7.0 buffer powder sachet\u003c\/li\u003e\n\u003cli\u003e1x Acid drum label\u003c\/li\u003e\n\u003cli\u003e1x Silicone grease sachet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003e⚙️ Specifications \u0026amp; Compatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Maytronics\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e pH-Drive i-Series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Automatic pH controller with peristaltic dosing pump\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with:\u003c\/strong\u003e Maytronics Ozone Swim units with the pH-Drive outlet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e From the Ozone Swim unit (IP65 connector)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcid:\u003c\/strong\u003e Diluted hydrochloric (muriatic) acid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDefault set point:\u003c\/strong\u003e pH 7.6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe size:\u003c\/strong\u003e 50 mm (40 mm with included bushes)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e BR-OZ-I-Drive-P\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003e*Images are for illustration purposes only. The actual product may differ from the image. Please read the product description and included parts for full details.\u003c\/em\u003e\u003c\/p\u003e\u003ch2\u003e💡 Before You Buy\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck your system.\u003c\/strong\u003e The pH-Drive is powered by a Maytronics Ozone Swim unit and needs the matching outlet on that unit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe position.\u003c\/strong\u003e The pH tee goes on the return line after the filter and heater, before any chlorinator cell, ozone venturi or chlorine injection point.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcid drum.\u003c\/strong\u003e Use a 20 or 25 L acid drum mixed at least 3 parts water to 1 part acid, kept below the non-return valve. Always add acid to water.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstallation.\u003c\/strong\u003e Mount the controller vertically, out of direct sun and rain, with cables at the bottom.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003e❓ Common Questions\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat acid does it use?\u003c\/strong\u003e Diluted hydrochloric (muriatic) acid; Maytronics recommends pre-diluted acid.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHow often does the probe need calibrating?\u003c\/strong\u003e The controller reminds you about every 12 months; calibrate with pH 7.0 buffer or against an accurate pool reading.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWhat wears out?\u003c\/strong\u003e The pump squeeze tube; the unit reminds you after 50 hours of pump running.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003e📂 Downloads and Support\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.maytronics.com.au\/\" target=\"_blank\" rel=\"noopener\"\u003eMaytronics Australia\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/ozone-cell\"\u003eOzoneSwim Chlorine Cell 2000 Series\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/maytronics-ozoneswim-chlorine-cell-2000-plus-3000-plus-resin-series-br-ccell3000plus\"\u003eOzoneSwim Chlorine Cell 2000 Plus \/ 3000 Plus Resin\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/vendors?q=Maytronics\"\u003eShop all Maytronics products\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003e🚚 Shipping\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eFlat Rate\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eExpress\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/pages\/shipping\"\u003eReview all shipping rates\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003e🛡️ Warranty Information\u003c\/h2\u003e\u003cp\u003eThe pH-Drive i-Series controller has a 2 year limited warranty and the pH sensor has a 12 month warranty from \u003ca href=\"https:\/\/www.maytronics.com.au\/\" target=\"_blank\" rel=\"noopener\"\u003eMaytronics\u003c\/a\u003e. The squeeze tube, valves and fittings, and damage from undiluted acid are not covered.\u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOther Search Terms:\u003c\/strong\u003e ph drive, ph-drive, i-drive, maytronics ph controller, ozone swim ph, BR-OZ-I-Drive-P, BR-OZ-I-Drive, automatic ph doser, acid dosing pump pool\u003c\/p\u003e","brand":"Maytronics","offers":[{"title":"Default Title","offer_id":38004142440646,"sku":"BR-OZ-I-Drive-P","price":810.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0361\/8819\/2900\/products\/pH_Drive_iSeries_Actual.png?v=1653273245","url":"https:\/\/aquafirst.com.au\/products\/maytronics-ph-drive-i-series-with-probe","provider":"Pools Online","version":"1.0","type":"link"}