BWT F1 RXT Robotic Pool Cleaner
🏷️ Brand
BWT
📝 Description
The BWT F1 RXT is a corded robotic pool cleaner that cleans the floor, walls and waterline of residential pools, running from a low voltage power supply that sits outside the pool and connecting to the BWT Best Water Home app.
The robot follows its selected cleaning program on its own, climbing the walls at set intervals, and switches off automatically when the cycle ends. Debris is collected in filters inside the robot, which lift out for rinsing after each clean.
It comes with a cart for moving and storing the robot, so nothing has to stay in the pool between cleans.
📦 Parts Included
- 1x BWT F1 RXT robotic pool cleaner with floating cable
- 1x Power supply
- 1x Caddy cart
- 1x User manual
⚙️ Specifications & Compatibility
-
SKU: F1RXT
-
Cleans: floor, walls and waterline
-
Type: corded robotic cleaner with floating cable
-
App: BWT Best Water Home app
-
Power: low voltage robot; the power supply plugs into mains power protected by an RCD of 30 mA or less
-
Water temperature: 13°C to 35°C
-
Water conditions: pH 7.2 to 7.6, chlorine 2 to 4 ppm, salt up to 5000 ppm
-
Suits: private residential pools
*Images are for illustration purposes only. The actual product may differ from the image. Please read the product description and included parts for full details.
💡 Before You Buy
-
Power supply placement. The power supply is not water resistant. Place it at least 3.6 m from the pool, at least 12 cm above the ground and out of direct sunlight, plugged into an RCD-protected (30 mA) outlet.
-
Cable reach. The cable needs to reach the far corner of your pool: allow the pool's diagonal plus about 2 m.
-
Salt pools. Salt levels above 5000 ppm void the warranty, so check your salt reading first.
-
Residential use. The BWT warranty covers private residential pools only.
🔧 Our Tips
-
Rinse the filters every cycle. Rinse the outside of the filters first, then the inside, after each cleaning cycle.
-
Never run it out of water. Running the robot out of the pool damages it straight away and voids the warranty.
-
Skip it after flocculant. Don't use the robot after adding liquid flocculant or clarifier, as these damage the filters.
-
Store it dry. After cleaning, unplug the power supply, rinse the robot with fresh water, let it dry and store it on the cart out of the pool.
❓ Common Questions
-
Does it climb walls? Yes. The F1 RXT cleans the floor, walls and waterline, climbing the walls at intervals set by its program.
-
Can I leave it in the pool? No. BWT says not to leave the robot in the pool when it is not in use.
-
Can I use it in a salt water pool? Yes, provided the salt level stays at or below 5000 ppm (0.5%).
-
How long is the warranty? BWT covers the robot's components for 4 years from delivery when it is used in a private residential pool and maintained as per the manual.
📂 Downloads and Support
🚚 Shipping
- Large / Bulky or Oversized
- Special Order Item - Please allow an additional 3-5 working days for shipping
- Review all shipping rates
🛡️ Warranty Information
Covered by the BWT manufacturer warranty of 4 years on the robot's components when used in a private residential pool and maintained as per the manual. Repairs must be done by a BWT-authorised service centre; unauthorised repairs or modifications void the warranty.
Other Search Terms: BWT F1 RXT, F1RXT, F1-RXT, F1 RXT robot, BWT robot, BWT robotic cleaner, F1 robotic pool cleaner, Sunlover robotic cleaner, wall climbing pool robot