40 mm PVC Pressure 45 Degree Elbow for Pool Pipework

🏷️ Brand

May vary (Vinidex/Holman/Other)

📝 Description

A 40 mm PVC pressure 45 degree elbow for turning 40 mm pressure pipe through a gentle angle. Use one for a shallow change of direction, or two together for a 90 degree bend with a smoother sweep than a single 90 degree elbow. It is a pressure fitting for pressurised pool and spa plumbing, not a drain (DWV) fitting.

📦 Parts Included

• 1x 40 mm PVC pressure 45 degree elbow

📐 Measurements

Measurements are approximate.

• Nominal size: 40 mm
• Angle: 45 degrees

⚙️ Specifications & Compatibility

• Brand: May vary (Vinidex/Holman/Other)
• Type: Pressure fitting
• Material: PVC
• Connection: Socket at both ends, joined with PVC solvent cement
• SKU: PVC40-45

💡 Before You Buy

• Pipe size. It takes 40 mm nominal PVC pressure pipe. For 50 mm pipe use the 50 mm 45 degree elbow, or step down with the 50 to 40 mm reducing coupling.
• Cement and primer are separate. The elbow is supplied on its own.
• More 40 mm fittings. We also stock the 90 degree elbow, coupling, tee and end cap.

❓ Common Questions

• What pipe does it fit? 40 mm nominal PVC pressure pipe. Both ends are plain sockets.
• Is glue included? No. PVC solvent cement and primer are sold separately.

📂 Downloads and Support

• Vinidex Website
• Shop Spare Parts

🚚 Shipping

• Flat Rate
• Express
• Review all shipping rates
• Note: If large box quantities of fittings are purchased together, additional shipping charges may apply. We will contact you if this applies after checkout.

🛡️ Warranty Information

Covered by a standard 12 month manufacturer warranty.

Other Search Terms: PVC40-45, PPF155, VF445, 35220, 40mm 45 elbow, 40mm 45 degree elbow, PVC 45 bend, 40mm PVC bend, PVC pressure fitting, pool plumbing fitting, pressure pipe fitting