Oasis Smart Pool and Spa Wi-Fi Control System
🏷️ Brand
Oasis (Sunlover Group)
📝 Description
The Oasis Smart (OSC001) is a Wi-Fi pool and spa automation controller from the Sunlover Group that lets you run your filter pump, sanitiser, heating, lights, water features and valves from a phone app, with two built-in 240V outlets, four valve actuator outlets and room for expansion units.
Turn the heater up, switch the lights on or start the water feature when guests arrive, set cleaning and maintenance schedules, or get the pool ready before you get home. The controller plugs into a standard power point and handles up to four filtration times, variable speed pump control, heater control and a water temperature sensor.
Add up to two Oasis Smart expansion units (three outlets each) for more equipment, and pair it with the Oasis SmartChem for automatic pH and chlorine (ORP) control.
📦 Parts Included
- 1x Oasis Smart master controller (OSC001)
- 1x Mounting bracket with screws and wall plugs
- 1x Installation and operation manual
📐 Measurements
Measurements are approximate.
- Height: 160 mm
- Width: 200 mm
⚙️ Specifications & Compatibility
-
SKU: OSC001
-
Outlets: 2x 240V sockets (combined max 9.98 A / 2395 W)
-
Valve actuator outputs: 4 (24VA max; 2 valves run at once)
-
Other connections: heater interlock (24V, 1A max), pump call, VF contact, water temperature sensor
-
Expansion: up to 2 expansion units with 3 sockets each (up to 8 sockets total)
-
Pumps: single speed, or multi-speed from Theralux, Pentair VS/F, Reltech, Insnrg, Henden or DAB
-
Heating: solar (separate, valve or boosted), heat pump, gas heater
-
Lights: AquaQuip, Aquatight, Spa Electrics ModLite and Multi Plus, Astral Pool or single colour lights (up to 3 light sockets)
-
Wi-Fi security: open, WEP, WPA, WPA2, WPA/WPA2 PSK and WPA2 Enterprise
-
Power cable: 1.8 m, plugs into a standard GPO
-
Protection rating: IP33
💡 Before You Buy
-
Count your equipment. The master controller has 2 outlets. If you have more than two pieces of 240V equipment (pump, chlorinator, lights, heater pump, cleaner pump, blower), add one or two Oasis Smart expansion packs.
-
Check your pump. Variable speed control works with the pump brands listed in Specifications; other single speed pumps are switched on and off.
-
Wi-Fi. Make sure your home Wi-Fi reaches the equipment area.
-
Mounting. Mount at least 3 m from the water's edge and 600 mm above ground, out of direct weather.
❓ Common Questions
-
Can it control my heat pump or gas heater? Yes, it supports heat pumps, gas heaters and solar heating, using the heater interlock or a heating pump outlet.
-
How many lights can I control? Up to 3 sockets can be allocated to pool or spa lights.
-
Can it control pH and chlorine? Yes, add the Oasis SmartChem dosing unit.
📂 Downloads and Support
🚚 Shipping
🛡️ Warranty Information
Limited 3 year back-to-base warranty from Sunlover / Oasis against component failure or faulty workmanship. On-site labour and travel are not covered.
Other Search Terms: OSC001, Oasis Smart, Oasis Smart controller, pool automation, wifi pool controller, Sunlover Oasis Smart, pool and spa control system, smart pool app
