Oasis SmartChem Additional Acid Feed Hose 4m
🏷️ Brand
Oasis (Sunlover Group)
📝 Description
The Oasis SL0131 is a 4 m length of genuine acid feed hose for the Oasis SmartChem (AC1 and AC1-pH) dosing system, used to replace worn tubing or to extend the run between the acid drum, the dosing pump and the injection point.
Acid tubing hardens and wears over time, mostly at the injection point. Oasis recommends inspecting the feed tube every three months and cleaning or trimming it, so it pays to have a spare length on hand.
📦 Parts Included
📐 Measurements
Measurements are approximate.
⚙️ Specifications & Compatibility
*Images are for illustration purposes only. The actual product may differ from the image. Please read the product description and included parts for full details.
💡 Before You Buy
-
When to replace it. Oasis recommends checking the acid feed tube at the injection point every three months and cleaning or trimming it. Replace tubing that is brittle, split or too short to trim again.
-
Check the valve at the same time. If the feed tube drains back to the drum when dosing stops, you also need the Oasis SmartChem Acid Hose Check Valve 3/16" (SL0157).
🔧 Our Tips
-
Warm the ends. Soak the tube ends in hot water for 30 seconds to make them easier to push onto the barbs.
-
Keep the drum clear. Keep the acid drum at least 1.8 m from the controller and other pool equipment when you route the hose.
📂 Downloads and Support
🚚 Shipping
🛡️ Warranty Information
Covered by a standard 12 month manufacturer warranty from Sunlover / Oasis.
Other Search Terms: SL0131, SL-0131, SmartChem acid hose, acid feed tube, acid dosing tube, dosing pump tubing, Oasis acid hose, Sunlover SmartChem hose