Sunlover Solar Controller Pool / Cold Sensor Digital 2m
🏷️ Brand
Sunlover
📝 Description
The Sunlover SSS002 is a genuine digital pool (cold) temperature sensor with 2 m of cable for Sunlover SL3, SL6, SL8 and V2 & V7 solar controllers, measuring the pool water temperature so the controller knows when solar heating is needed.
The sensor fits into the pool pipework before the pump, through a grommet in the side of the pipe.
📦 Parts Included
- 1x Sunlover pool (cold) sensor with 2 m cable
📐 Measurements
Measurements are approximate.
⚙️ Specifications & Compatibility
-
SKU: SSS002
-
Type: digital pool / cold sensor
-
Compatible with: Sunlover SL3, SL6, SL8 and V2 & V7 controllers
*Images are for illustration purposes only. The actual product may differ from the image. Please read the product description and included parts for full details.
💡 Before You Buy
-
Pool or roof sensor? This is the pool (cold) sensor with a short cable. The roof (hot) sensor with a 20 m cable is the Sunlover Roof / Hot Sensor 20m (SSS001).
-
Fitting. Fit it in the side of the pipe, not the top, before the pump, close to the pool and out of direct sun.
🔧 Our Tips
-
Power off first. Turn the controller off and unplug it from the power point. If the equipment sits below water level, close any isolating valves.
-
Roll the old probe out. Pull the old probe out of the pipe with a rolling motion. It resists after about 10 mm, then comes free. Watch for water coming out of the hole.
-
Fit the new one. Plug the new sensor into the controller and push the probe into the pipe with a rolling motion. Only replace the rubber seal if it came out or is damaged, then tidy the cable with cable ties.
📂 Downloads and Support
🚚 Shipping
🛡️ Warranty Information
Temperature sensors carry a 12 month warranty from Sunlover.
Other Search Terms: SSS002, TS02, Sunlover pool sensor, solar cold sensor, solar controller pool sensor, SL3 pool sensor, SL6 pool sensor, SL8 pool sensor