Sunlover Solar Repair Kit Small
🏷️ Brand
Sunlover
📝 Description
The Sunlover SAP017 Solar Repair Kit Small is the genuine Sunlover repair kit for strip solar pool heating, with 10 pieces of solar tubing, 10 joining barbs, 20 sleeves and 10 grommets to fix pin hole leaks, tears and broken manifold barbs.
It covers the three common solar repairs. A pin hole leak is fixed by cutting the tube and joining it back together with a barb. A tear is fixed by cutting out the damaged section and joining in a piece of the supplied tubing. A broken barb on the header manifold is fixed by drilling out the hole and fitting a grommet and joining barb.
📦 Parts Included
- 10x Individual solar tubing pieces
- 10x Joining barbs
- 20x Sleeves
- 5x Small grommets
- 5x Standard grommets
- 1x Repair instructions
⚙️ Specifications & Compatibility
-
SKU: SAP017
-
Kit: Sunlover Solar Repair Kit Small
-
Repairs: pin hole leaks, tears and broken manifold barbs
-
Suits: Sunlover strip solar systems and Sunlover moulded manifolds
*Images are for illustration purposes only. The actual product may differ from the image. Please read the product description and included parts for full details.
💡 Before You Buy
-
Just a couple of tube leaks? The Sunlover Solar Repair Kit mini kit (6 barbs and 12 sleeves) is a cheaper option when you don't need tubing or grommets.
-
Tools needed. You'll need a sharp knife to cut the tube, a water based lubricant and, for manifold repairs, a drill with a 5 mm drill bit.
-
Working on the roof. Solar repairs are done on the roof, so take care working at heights and turn the solar pump off first.
🔧 Our Tips
-
Pin hole leak. Isolate the affected tube and cut it at the leak. Lightly spray with a water based lubricant, insert a joining barb into each end of the tube and push them firmly together.
-
Tear leak. Cut out the damaged section. Lubricate, insert a joining barb into each end, place a short section of the supplied tubing in the gap and repeat the join.
-
Broken manifold barb. Remove the broken barb and clean the area, then carefully drill out the hole with a 5 mm drill bit. Fit a grommet into the hole, lubricate and insert a joining barb, then join the solar tube onto the other end of the barb.
-
Barb stuck in the tube? If the broken barb can't be removed from the tube, cut that length off, fit a new barb into the tube and connect it to the manifold.
❓ Common Questions
-
What's the difference between this and the mini kit? This kit adds solar tubing and grommets for tear and manifold repairs; the mini kit is barbs and sleeves only.
-
What lubricant should I use? A water based lubricant, lightly sprayed on the area before inserting the barb. Never use petroleum or oil based lubricants, which damage the solar absorber and grommets.
-
Can it fix a broken manifold? Yes, if a barb on the moulded manifold has broken off: drill out the hole, fit a grommet and insert a joining barb.
📂 Downloads and Support
🚚 Shipping
🛡️ Warranty Information
Covered by a standard 12 month manufacturer warranty from Sunlover.
Other Search Terms: SAP017, Sunlover repair kit, Sunlover solar repair kit small, solar tube repair kit, solar manifold repair, solar grommets, solar joining barbs, pool solar leak repair, sun lover repair kit