Description
Oasis Rapid Pro Inverter Pool Heat Pump
🏷️ Brand
Oasis (Sunlover Group)
📝 Description
The Oasis Rapid Pro is an inverter pool heat pump from the Sunlover Group, available from 14kW to 40kW, with a coefficient of performance (COP) of up to 20, built-in Wi-Fi, a 3D titanium heat exchanger, R32 refrigerant and an aluminium casing.
RapidHeat technology gives a 20% faster heating rate to bring your pool up to temperature. Once it gets there, the heat pump holds the water warm at an average of around 30% capacity, which keeps noise and running costs down.
Three modes let you choose how it works: Rapid Heat (120% heating capacity for the fastest heat-up), Smart Heat (20–100% capacity, matched automatically to hold your set temperature) and Silence Heat, where noise drops to around 36.6 dB(A) at 1 m.
The controller shows real-time power consumption and has tap-to-wake, and built-in Wi-Fi lets you control the heat pump from your phone. Oasis states the 3D heat exchanger design increases efficiency by 30%. The Rapid Pro can cool the pool as well as heat it.
📦 Parts Included
- 1x Oasis Rapid Pro heat pump (model as selected)
- 1x Controller with built-in Wi-Fi (fitted)
- Barrel unions for 40 mm PVC pressure pipe (more is available separately: Oasis 40mm Barrel Union for Oasis Heat Pumps (SL006))
- Rubber feet (more is available separately: Oasis Rubber Feet for Oasis Heat Pumps (SL0039))
- Drain barb
- 1x Installation and operation manual
📐 Measurements
Measurements are approximate.
- RP14 (L x W x H): 945 x 432 x 660 mm, 65 kg
- RP18 (L x W x H): 1045 x 432 x 660 mm, 73 kg
- RP22 (L x W x H): 1195 x 432 x 760 mm, 82 kg
- RP26 (L x W x H): 1072 x 536 x 956 mm, 100 kg
- RP32 (L x W x H): 1264 x 536 x 956 mm, 122 kg
- RP32T (L x W x H): 1264 x 536 x 956 mm, 132 kg
- RP40T (L x W x H): 1364 x 536 x 956 mm, 147 kg
- Water connections: 40 mm
⚙️ Specifications & Compatibility
- SKU: RP14 / RP18 / RP22 / RP26 / RP32 / RP32T / RP40T
- Heating capacity (air 27°C, water 26°C): RP14 13.5 kW, RP18 18.0 kW, RP22 21.5 kW, RP26 26.0 kW, RP32 31.5 kW, RP32T 31.5 kW, RP40T 40.0 kW
- Heating capacity (air 15°C, water 26°C): RP14 9.0 kW, RP18 12.0 kW, RP22 14.5 kW, RP26 18.0 kW, RP32 22.0 kW, RP32T 22.0 kW, RP40T 28.5 kW
- COP (air 27°C, water 26°C): up to 19.6 (RP14), 19.2 (RP18), 20.5 (RP22), 20.3 (RP26), 19.6 (RP32 and RP32T), 19.8 (RP40T)
- Cooling capacity (air 35°C, water 29°C): RP14 6.3 kW, RP18 10.0 kW, RP22 11.3 kW, RP26 13.0 kW, RP32 15.0 kW, RP32T 15.0 kW, RP40T 19.5 kW
- Operating air temperature: -7°C to 43°C
- Power supply: 230V/1ph/50Hz (RP14, RP18, RP22, RP26, RP32); 400V/3ph/50Hz (RP32T, RP40T)
- Electrical connection: RP14 15A plug; all other models hardwired
- Maximum current: RP14 12.5 A, RP18 16.5 A, RP22 18.5 A, RP26 20.5 A, RP32 24.0 A, RP32T 9.4 A per phase, RP40T 12.5 A per phase
- Water flow volume: RP14 67 L/min, RP18 100 L/min, RP22 140 L/min, RP26 167 L/min, RP32 200 L/min, RP32T 200 L/min, RP40T 260 L/min
- Sound pressure at 1 m: RP14 37.8–45.9 dB(A), RP18 41.5–47.3 dB(A), RP22 41.9–49.5 dB(A), RP26 42.0–50.0 dB(A), RP32 42.1–50.3 dB(A), RP32T 42.1–50.3 dB(A), RP40T 41.5–50.5 dB(A)
- Refrigerant: R32 (GWP 675)
- Water resistance: IPX4
- Wi-Fi: built in
*Images are for illustration purposes only. The actual product may differ from the image. Please read the product description and included parts for full details.
💡 Before You Buy
- Pick the right size. Heat pump size depends on your pool's surface area, volume, location and whether you use a blanket. Compare the heating capacity at 15°C air above as well as the headline figure, because output drops in cooler air.
- Check your power supply. The RP14 needs a 15A outlet. All other models are hardwired, and the RP32T and RP40T need three phase power. Hardwiring must be done by a licensed electrician.
- Plumbing and flow. The supplied fittings accept standard 40 mm PVC pressure pipe, and each model needs the water flow listed above.
- Check you have the space. The manual asks for a minimum gap of 400 mm at the back, 900 mm at the sides, 500 mm overhead and 1500 mm at the front.
- Using a chlorinator? Pair the heat pump with the Oasis Heat Junction 5 (HJ5) so your pool isn't over-chlorinated during long heat-up times on a one pump system.
🔧 Our Tips
- Position it well. Install the unit at least 3.5 m from the water's edge, ideally no more than 10 m away, and no more than 5 m below the pool or spa water level.
- Start the pump first. Turn on the water pump, check for leaks and flow, then switch on the power. Hold the padlock icon for about five seconds to unlock the screen and press the power icon. The heat pump starts within 60 seconds.
- Set the bypass valve. After 15 minutes of running, adjust the bypass so the difference between inlet and outlet water temperature is between one and two degrees Celsius.
- Be patient on the first heat-up. Run the pump and heat pump continuously until the pool reaches your set temperature. The unit then slows down by itself.
❓ Common Questions
- What's the difference between the Rapid Pro and the iX? Both are Oasis inverter heat pumps. The Rapid Pro adds built-in Wi-Fi, an aluminium casing, a 3D heat exchanger and a COP of up to 20, while the Oasis iX Rapid Heat Inverter Pool Heat Pump focuses on PV Ready solar modes with an optional Wi-Fi module.
- How quiet is it? In Silence Heat mode, noise drops to around 36.6 dB(A) at 1 m.
- Can it cool my pool? Yes, for example the RP14 has 6.3 kW of cooling capacity at 35°C air temperature.
- Will it work in winter? It operates in air temperatures from -7°C to 43°C and defrosts automatically, with lower output in colder air.
📂 Downloads and Support
- Oasis Rapid Pro Brochure (PDF)
- Oasis Rapid Pro Specifications (PDF)
- Oasis Rapid Pro Installation and Operation Manual (PDF)
- Oasis Heat Pump Warranty (PDF)
- Oasis Rapid Pro on the Sunlover website
- Shop Heat Pumps
- Shop Pool Heating
- Shop all Sunlover and Oasis products
🚚 Shipping
- Large / Bulky or Oversized
- Special Order Item - Please allow an additional 3-5 working days for shipping
- Review all shipping rates
🛡️ Warranty Information
Oasis heat pump warranty from Sunlover / Oasis: 25 years on the titanium heat exchanger against corrosion, 5 years on the compressor, 2 years on parts and the heat exchanger casing, and 1 year on installation and labour completed by Oasis or Sunlover Heating. Commercial installations are limited to 12 months parts and in-field labour.
Other Search Terms: Oasis Rapid Pro, Rapid PRO heat pump, RapidPro, RP14, RP18, RP22, RP26, RP32, RP32T, RP40T, Sunlover heat pump, Oasis Aquatics heat pump, inverter pool heater, wifi pool heat pump, pool heater 14kw 18kw 22kw 26kw 32kw 40kw
