Swimming Pool Temperature Sensor for Testing Actual Pool Water Temperature (with 2.5m Long Cable)

🏷️ BRAND:

The original manufacturer brand is Dontek, but these are used by virtually all pool equipment manufacturers in Australia. 

📝 DESCRIPTION:

There are 2 types of cold/pool water temperature sensor available. They use identical plugs, but only one will work on your device.

1. Black Sensor (Analogue) 113020 - This analogue pool/cold water sensor is the original, more common style of pool water temerature sensor.
2. Blue Sensor (Digital sensor) 113018 - This digital style of pool/cold water sensor, and is typically found on newer devices.

The back or blue colour refers, not to the power connector end that attaches to your device, but instead, the colour refers to the plastic coating around the actual temperature sensor/gauge, that protects it from environmental degredation. It's this blue/black plastic coated end, that is inserted into the piepwork to sample your pools water temperature. The black rubber grommet found on both versions is designed to secure the sensor in the pipework, while preventing water from leaking out. Coating all rubber orings, gaskets, grommets and seals, with silicone lubricant, will create a much better seal and prolong their life.

CHOOSING THE CORRECT SENSOR FOR YOUR POOL:

The follow is a list of products that use each of these 2 sensors. If your's is not listed here, please reach out, so we can get this list updated for you and other Australian pool owners.

BLACK TEMPERATURE SENSOR (1131020):

• AS2+ (Donteck Aquasun 2+)
• AS3+ (Donteck Aquasun 3+)
• AS5 (Donteck Aquasun 5)

BLUE TEMPERATURE SENSOR (1131018):

• Insnrg Ni, Vi & Ri Chlorinators
• Dontek Solar Controller (V1, V2, V4, V5, V7)
• H3 (Dontek Aquaswitch)
• AS2 (Dontek Aquasun 2)
• AS3 (Dontek Aquasun 3)

📦 PARTS INCLUDED:

• 1 x Genuine Dontek 2.5-Metre Cold/Pool Water Temperature Sensor Cable
• 1 x Heavy-Duty Black Rubber Pipe Locking Grommet Seal

📐 MEASUREMENTS:

• Cable Length: 2.5 Metres
• Pipe Access Probe Diameter: 8mm
  

⚙️ SPECIFICATIONS & COMPATIBILITY:

• Brand Compatible: Dontek, Insnrg, AquaSmart, Ascon, Waterco, AstralPool, Hurlcon, Zodiac
• Brand: Dontek Electronics
• Model: 2.5m Pool/Cold Water Temperature Sensor Cable
• Replaces: 1131020 (Black/Analogue), 1131018 (Blue/Digital), 2.5m Sensor Leads
• Compatible With:
  • Black Analogue Version (1131020) fits: Dontek Aquasun 2+ (AS2+), Aquasun 3+ (AS3+), and Aquasun 5 (AS5) controllers.
  • Blue Digital Version (1131018) fits: Insnrg Ni, Vi & Ri Series Chlorinators, Dontek Solar Controllers (V1, V2, V4, V5, V7 Series), Aquaswitch H3, Aquasun 2 (AS2), and Aquasun 3 (AS3).
• Colour: Choice of Black (Analogue) or Blue (Digital) Sensor Protective Tip
• SKU: 1131020 / 1131018

🛡️ WARRANTY INFORMATION: