Sunlover Flow Switch with 50mm Tee for HC5FS
🏷️ Brand
Sunlover
📝 Description
The Sunlover FSA50 is a flow switch supplied with a 50 mm tee, used with the Sunlover Heat Command 5FS solar controller (HC5FS) so the solar pump only runs when the filter pump is running and water is flowing.
On retro-boosted solar systems the solar pump draws from the filtration line. The flow switch tells the HC5FS controller when there is water flow, protecting the solar pump from running dry.
📦 Parts Included
- 1x Flow switch
- 1x 50 mm tee
⚙️ Specifications & Compatibility
-
SKU: FSA50
-
Pipe size: 50 mm tee
-
Suits: Sunlover Heat Command 5FS (HC5FS)
-
Controller connection: two-pin green plug, no cable polarity
*Images are for illustration purposes only. The actual product may differ from the image. Please read the product description and included parts for full details.
💡 Before You Buy
-
Needed for the HC5FS. The HC5FS controller's flow switch kit is sold separately, and this is it.
-
Correct position. The flow switch goes in the PVC pipe after the filter and before the take-off tee that feeds the solar pump.
🔧 Our Tips
-
Mount it horizontally. Fit the flow switch horizontally with the cable coming out of the top and the arrow pointing in the direction of water flow.
-
Plug it in firmly. The green two-pin plug goes into the flow switch socket on the base of the controller. If the controller shows "FILTER PUMP OFF, CANNOT START" while the filter pump is running, check this plug is secure.
📂 Downloads and Support
🚚 Shipping
🛡️ Warranty Information
Flow switches carry a 12 month warranty from Sunlover.
Other Search Terms: FSA50, Sunlover flow switch, FSA flow switch, solar flow switch 50mm, HC5FS flow switch, Heat Command 5FS flow switch